606
Tranzview Smatlab 16 Channel Isolator Input Board
Board for remote digital I/O over your ethernet
Solution for Your Developing DAQ Application System



















Tranzview Systems Hardware Based
PC Systems
Video Capture card


PC COM RS232 Serial Card
+ Decision Industrial I/O Card
+ Decision Analog I/O Card
+ Decision Data Acquisition I/O Card











16 CHANNEL PHOTO ISOLATOR INPUT BOARD





The 16 Channel Isolator Input Board provides 16 Opto-Isolated Digital Input Channels, which allow the input signals to be completely floated and prevent the ground loop. There are LED indicator correspond to 16 input channels, when the input channel is activated at high status, the corresponding LED is light. The power source is user selectable from internal PC bus or external power supplier.

The features of 16 Channel Isolator Input Board are:

#Support 16 Opto-Isolated input channels.

#LED indicates when input channel is activated.

#Internal and external power selectable.

#Built in screw terminals for easy wiring.

#Allow the input signals to be completely floated and prevent the ground loops.

#Isolated or non-isolated modes selectable.

#Input threshold voltage adjustable.

#Breakdown voltage: 1500V DC.

#Screw terminal: accept #22 to #12 awg wire.

#Input current: 80mA maximum for each isolated input.

#Input voltage: 30VDC maximum for each isolated input.

Hardware Installation:

Configuration For Jumper
Before you use the 16 Channel Isolator Board, you must ensure that the power supplier, jumpers, and connectors are set correctly. Observe the figure in the following; the proper settings for the 16 Channel isolator Input Board are described in the follows.

Technical data - Isolated input Output and Relay Output
Isolated input: The digital signal input with isolated protection.
Photo Isolator :
Word File 4N35
Hyper Link