401-53
Creating Web-Based Data Acquisition Appliances
Installation Web Data Acquisition Server
Web DAQ DIY

This install CD is prepare for i810, SiS730s or Geode (Cyrex CS5530A) Main board chipset.

If your main board not in this list; please contact Tranzview technical support team, requisite special customer made install CD.



Install Tranzview Embedded Web Server
Mother Board Chipset Support� i845, i810, i815, KT133, sis730, sis740

Step 0: Prepare Hardware
PC
PCCOM Serial Communication Card
Smatelab Digital Isolator Input and Output card
Video Capture Card
AD/DA card

 
Step 1: a. Turn ON PC power.

b. Put CD in CD ROM Driver.




tvaudio: found pic16c54 (PV951)

bttv3: i2c attach [client=pic16c54 (PV951),ok]

i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #3](pos.

tuner: probing bt848 #3 i2c adapter [id=0x10005]

i2c-core.o: adapter bt848 #3 registered as adapter 3.

bttv3: registered device video3

bttv3: registered device vbi3

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 2048 buckets, 16Kbytes

TCP:Hash tables configured (established 16384 bind 16384)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

NET4: Ethernet Bridge 008 for NET4.0

RAMDISK: Compressed image found at block 0

Freeing initrd memory: 341k freed

VFS: Mounted root (ext2 filesystem).

Freeing unused kernel memory: 260k free

root /dev/hdc

BusyBox v0.60.3 (2002.06.20-18:01+0000) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off

 


Start Installing Tranzview System



***** HardDisk Configuration *****



HardDisk on /dev/hda will now be partitioned.



Step 2: Key in



Do you wish to continue? (yes/no):Yes

./server/.ncftp/trace.350
./server/.ncftp/trace.446
./server/.ncftp/trace.314
./server/.ncftp/bookmarks
./server/.ncftp/trace.161
./server/terminal.jar
./server/dat/
./server/dat/slot.dat
./server/dat/rules.dat
./server/dat/virtualbuttons.dat
./server/dat/arrangement.dat
./server/startX
./server/start
./ttyp0
./var/
./var/lock/
./var/lock/subsys/
./var/log/
./var/run/
./var/var/
./var/var/proftpd/
./fb0
Please select Chip Set of the mainboard.


step 3:

1:i810    2:Other(SIS, VIA...)

Added DOM *

Tranzview System has been successfully installed.

Default setting:
    Local setting
        Username:root
        Passward:111111
        IP:192.168.1.41
        Gateway:192.168.1.1
        Netmask:255.255.255.0
        Broadcast:192.168.1.255
    Remote setting
        Username:root
        Passward:123456

Please reboot the system and start
 system from primary master disk.


BusyBox v0.60.3 (2002.06.20-18:01+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off
#