The PCI 16 channels photo isolator input/output adapter is a 32 bits PCI bus board with Plug and Play (PnP) features, it is a programmable I/O interface card for PC/486, Pentium, or compatibles. The PnP features let hardware configuration for IRQ and I/O address is detected by BIOS automatically, you don't need set switch and jumper.
The PCI 16 channels photo isolator input/output adapter provides 16 photo couple digital input/output channels, which allow the input/output signals to be completely floated and prevent the ground loop.
Features :
 |
32 bits PCI bus with Plug and
Play (PnP) features. |
||||||||||||||
| |
Support 16 photo couple
input/output channels. |
||||||||||||||
|
|
Allow the photo input/output signals to be completely floated and prevent the ground loops. | ||||||||||||||
| |
16 LED correspond to 16 output
ports activation status. |
||||||||||||||
| |
By
using 4N33 photo couple chips. |
||||||||||||||
| |
1500V
isolation voltage. |
||||||||||||||
| |
Maximum
load voltage is 30V. |
||||||||||||||
| |
Maximum
80mA input current. |
||||||||||||||
| |
Voltage
range from 0V to 30V, where 0 to 3V is OFF and 5V to 30V is ON. |
||||||||||||||
| |
By using 4N33 photo couple
chips. |
||||||||||||||
| |
Relative humidity rage from 0
to 90%. |
||||||||||||||
|
|||||||||||||||
| |